Marriage In Pride And Prejudice Essays - Pride And Prejudice

Marriage In Pride And Prejudice Marriage in Pride and Prejudice It is a truth universally acknowledged, that a single man in possession of a good fortune, must be in want of a wife. This first sentence of Jane Austen's Pride and Prejudice could not have better prepared the reader for the rest of the novel. The thread that sews together the lives of all the characters in this classic is the establishment of marriage. Austen uses the Bennet family of Longbourn to illustrate the good and bad reasons behind marriage. Mrs. Bennet is an irritating woman whose main goal in life is to get her five daughters married. It might be correct in assuming that she felt social and financial pressure to do so. Her husband's estate was entailed to his nephew, Mr. Collins, upon Mr. Bennet's death. Therefore, Mrs. Bennet wanted her daughters to have financial stability elsewhere in case of their father's death. In the time period of this story there was very little social acceptance of women who were single their whole lives. For the most part, women could not acquire money on their own without inheriting or marrying into good fortune. Women who could not find a husband were often referred to as old maids and lived their whole lives with their parents. I can understand why Mrs. Bennet did not want this for any of her daughters. The Bennets' marriage was not ideal. Mr. Bennet had married his wife because she was beautiful in her youth and her ability to supply him with children. Eventually though, her beauty faded and so did their enjoyment of each other. He enjoyed his time alone in his study where he could be away from his wife and daughters. Mrs. Bennet enjoyed gossiping about neighbors and finding future husbands for her daughters. I do believe that Austen is showing the reader that marrying only for physical appearance is wrong - beauty fades with time. Charlotte Lucas, Elizabeth's dearest friend, marries Mr. Collins for money. The narrator plainly states that Charlotte accepted his proposal for the pure and disinterested desire of an establishment. She was twenty-six years old and her family was beginning to be worried. Upon hearing of her engagement, her brothers were relieved from their apprehension of Charlotte dying an old maid. Charlotte wanted nothing more out of marriage than financial stability and that is what she got. In Hunsford it seems that Charlotte did nothing but tend to the chores of maintaining her home and pleasing Lady Catherine. I do not believe that Charlotte and Mr. Collins were in love at all and they did not really seem too happy in each other's company. I think their marriage was an illustration of why you should not marry just for financial reasons. Lydia's marriage to Wickham was simply for romance and lust. For a good while, the flirtatious teenager had had her eye on military officers. I believe that when Wickham showed her attention she fell in love and henceforth came their marriage. The sad fact is that she liked him a great deal more than he cared about her. Wickham had many debts and used the money he got from marrying her to pay them off. Therefore, Lydia is married to a man that doesn't really care for her all that much and Wickham is married to a girl that cannot really offer him anything. This couple shows that you should marry someone who feels the same towards you or eventually you will be unhappy. The marriages of the two eldest Bennet daughters were pleasant and appear to be ideal. Jane had longed for Mr. Bingley for quite a while. Bingley was handsome, rich, kind, and well liked. He and Jane shared many conversations and had complimentary personalities. They were pleasantly matched and I believe that they shared a happy life together. Elizabeth and Darcy's marriage was an excellent match. They were equal in intellect, had physical attraction and deep love for one another, financial security, romance, and companionship. They are the two I believe would be most happy in life. Austen wanted the reader to know that marriage should be approached as a package deal - a package of love, financial stability, physical attraction,

Anna Karanina essays

Anna Karanina essays L.E.A.P. Journal for Anna Karenina by Leo Tolstoy A. Section covered: Part 1 and 2 (pages 17-245) B. Summary: This story first starts out with chaos in the Oblonskys household. Prince Stephen Oblonsky's wife Dolly found out that he was having an affair with their childrens French governess and threatened to move out of the house and take the kids with her. Stephen Oblonsky does not feel bad for having an affair. What he feels bad for is getting caught by his wife. Even though he is upset he is happy to hear the news that his sister, Anna Karenina, is coming to town though. Later in the section Anna convinces Dolly to stay with her husband and not move out. It did not take much to convince her because her threats were empty. Oblonsky is the head of a distinguished Government Board in Moscow. He is glad to leave his house and go to work to meet his friend Levin after a committee meeting. He remembers that he friend Levin is in love with his sister-in-law Kitty Shcherbatskaya. He later asked her to marry him, but she declines his proposal. Kitty is waiting to marry Count Vronsky. When Anna comes to town her and Vronsky fall in love despite that she is already married. Kitty realized that Vronsky was not going to marry her. She got sick and went abroad to recover. Anna lies to her husband which make them drift farther apart, but she and Vronsky draw closer. C. Analysis: The way this book is starting out it seems like Leo Tolstoy has written it about the love and the marriage of higher powered figures in Russia. He started out the story with the fighting in the Oblonsky household. That seems to refer to the downside of some marriages because Dolly found out about her husband cheating on her. In the Oblonsky house Tolstoy also shows loyalty from Dolly. She knows her threats were empty and she knows that she will forgive her husband. Tolstoy shows different angles with each couple. Anna and her husband Karenin are wel ...

Advertising Argument Research Paper Example | Topics and Well Written Essays - 500 words

Advertising Argument - Research Paper Example Probably the audience of fashion shows got used to luxury and does not pay attention to the brands. Considering this fact, Dior decided to make advertisement excessively unrealistic. The whole setting is oversaturated with gold and shining and seems hyperbolized. The furniture in the Hall flows into a bright sparkling mass. The dress of the actress reminds the outfit of a fairy or a mermaid, and on the shot it looks like the actress is flying instead of walking. So Dior used the concept of magic to attract the interest and confirm the name. That is why creating its advertisement of a new scent which is called J`adore, Dior tried to make something that would instantly give an understanding of the peculiar brand. An incredibly beautiful woman dressed in a luxurious silk golden dress is walking down the aisle. She is shining in soft hazy light and the whole place, which looks like a big hall or a catwalk on some fashion show, seems to be lit with her light. It is difficult to define whether it is a real woman or some mythical creature because of this divine light. The first thing that draws viewer`s attention is participation of the celebrity in the advertisement. Charlize Theron, one of the most attractive women of the planet, is depicted as the main character of the commercial of J`adore Dior. The image created by Dior implies luxury, royalty, and wealth but it is all not new for the higher social class of every country. Therefore, the creators of this advertisement had to make something exceptionally to draw attention to it and to make people actually want this perfume and they found the solution. When it concerns luxury, you cannot impress anyone with exquisite dresses and perfumes but when it concerns magic†¦ that is completely different topic. Thus, Dior uses the image of an independent, seductive, and sexually attractive woman appealing to the subconscious desire of every woman to be worshiped as a real goddess,

Responses to various articles Essay Example | Topics and Well Written Essays - 500 words

Responses to various articles - Essay Example The post touches on a sensitive topic but you wrote it in a fluent way that attempts to eliminate the ambiguity. The Needle Exchange Program (NEP) can be considered as controversial in its own capacity. You conducted research on two sensitive grounds, both the HIV pandemic and the NEP, and the post is a successful blend of both. In addition, it is an indication that the research was comprehensive. The post is informative on several grounds. It touches on how the LNG Project is beneficial to the economy. Secondly, it focuses on the impact of the project on the environment. It continues to offer a debate on the pros and cons of the project between the city council and Squamish Nation. However, your opinion is not concrete as you seem to be on both sides of the divide. It is important to indicate the Federal Laws in relation to the environment and the economy to come up with a concrete opinion on whether the project is good or bad. Your post is structured in a manner that indicates both sides of the divide, both the council members and residents of the White court, have valid arguments. The post is beneficial as well as informative. It indicates the interests of different parties in relation to the standards of living presented by housing in White court. It would be important to indicate the housing regulations in your research that would mitigate the absurdity of the claims from both council members and residents. The post is educative on matters regarding housing, standards of living and the economy at large.

The United Nations Research Paper Example | Topics and Well Written Essays - 1500 words

The United Nations - Research Paper Example The United Nation was based on the theory that all nations are equal according to international law despite variations in demographics. The United Nations has come to be recognized as a figure of peace and of order where Nations can come together to resolve issues or conflicts among them. Membership includes nearly two hundred different nations and often negotiations between Nations which involve economics, security and democracy are the focus of UN assembly’s. Each member of the United Nations has one vote in these assembly’s; the United States having one vote when assemblies meet to decide on issues and actions or responses to international threats or areas of interest such as global warming which has an effect on every nation. It is thought that the United States uses it financial power and influence to dictate to Countries considered third world or disadvantaged. At times when these Countries have used the United Nations to present their cases against the United States publicly the United States has retaliated with refusal to pay United Nations dues. With the United States being the largest financial contributor to the United Nations dues easily reach over 1 billion dollars. Disagreements caused the US to withdraw from UNESCO, the United Nations Education, Scientific and Cultural Organization. Many operational programs were begun by the UN and operational programs have continued to be developed (Sharp, 1965). The UN Children’s Fund, UNICEF, was given status as a permanent UN program in 1953. It is the oldest and the most recognized of the UN programs. UNICEF focuses on key areas in various locations, meeting the needs of children nationwide. UNICEF provides a global platform to stop preventable deaths among children using interventions such as access to health care, vaccinations, antibiotics, and protections methods from carries of diseases such as Malaria, education in good hygiene practices and the promotion of

Design Of A Pipe Climbing Robot Engineering Essay

Design Of A Pipe Climbing Robot Engineering Essay This technical paper explains the design process and simulation of a concept vehicle to drive inside a circular pipe of the desired configuration as shown in figure 1. The design is developed to facilitate; pipe climbing and carry an inspection of an inspection panel. This vehicle when operated will travel in a horizontal section of pipe initially, before entering the inclined part of the circular pipe. It then drives within 0.2m of the inspection panel and starts inspecting it with the help of an on-board camera. Specific equations and assumptions are used to monitor vehicle motion and system controllers are designed to enforce there is enough traction applied by the vehicle to grip the pipe and move forward. Figure 1 Pipe inspection Scenario Index Terms-design, linear actuators, multi-wheel drive, proximity sensor, robots Introduction Inspection and maintenance are essential in all industries. Failure to conduct proper maintenance could result in potential danger to workers and machines. Carrying out these inspections impose rigours hurdles in case of various industries where the conditions are unsafe for human workers, for example, inspection and maintenance in a nuclear industry, where the environment poses serious risk for the humans. The most common way for conducting these inspections in hazardous conditions is to use long manipulators which could be expensive. The alternate way of carrying these inspections is by using walking/climbing robots. Pipe climbing robots are advanced robots, which have the potential to climb inside/outside of a pipe to perform specific functions, where a normal operator cannot be used. The improvements in this sector have grown rapidly, since its a cheap and effective way for investigating various properties inside a pipe. An assignment has been assigned to design a concept vehicle to drive inside a circular pipe as in fig 1. This vehicle needs to enter the tunnel and drive to within 0.2m of the inspection panel and inspect the panel at the end of pipe. The vehicle must also carry a wire which is tethered. The climbing robots can be classified into four major categories based on their approach to climbing: adhesive, brute force fixture, spines and grasp. The robots with adhesive approach use a mechanism such as suction or an electromagnetic fixture on the climbing surfaces. The brute force robots use a mechanism to grab on to the structure and move forward. The spine group of robots use spines/multi-spines to attach themselves to the climbing surface so as to propel forwards. The last group of grasp robots use their own dynamic and kinematic state to grasp on to the engineering structure and moves forward. The present conceptual design can be categorised under grasping group of climbing robots. These robots consist of mainly two mechanisms, one to power the robot to move and the other to grip the surface of the structure. The mechanisms used to grip on to the surface can be facilitated by the usage of spring and v-shaped arm or longitudinal actuators. A v-shaped arm along with a compression spring is connected to the body of the robot. The compression springs tends to expand the arms, if the outer arm reaches the surface, it exerts a force normal to the contact of surface thus proving the traction for gripping the surface. In case of linear actuators various mechanisms are used to produce the linear motion of the arms to exert force onto the surface. The present design employs a linear actuator. It has longitudinal arms connected to linear actuators. The linear actuator is a simple rack-pinion mechanism, but consists of three racks to synchronise the outward motion equally in all three directions, thus providing an equal amount of force on each surface of the structure. A multi-wheel drive system is employed for the present case, as there is a need for requirement for more torque when the robot climbs the inclination part and to reduce the slip generated by the wheel. In the present case, the robot has five wheels and hence five individual motors, two on the bottom of the base, one on either side of robot and one at the top of the robot. When in operation the outer end of the wheels on all directions would be perfectly inscribed in a circle of 200cm when looked at front view. This mechanism coupled with linear actuators makes sure that at any instant all the wheels are in contact with the surface of the pipe thus providing maximum available traction for the robot. Robot model and modelling assumptions In the present concept of design the circular pipe is considered to be even and has a constant coefficient of friction throughout. Designing the robot requires a methodological approach to implement a professional structured robot is done by generating a CAD model of the robot. The components of the robot are selected with maximum care with feasible materials, since theoretical tests and scenarios can be modelled based on weight and dimension of the robot. After selection of optimum materials for robot, the design process is finished. The weight of the vehicle including the power source (batteries), on-board camera and computer controller along with other drive motors and actuators will approximately be around 1.8 kg. The dimensions of the robot while in operation are 0.275m in length, 0.2m in both width and height. The front part of the robot is designed in such a way that it gets inscribed in a circle perfectly during motion. To maintain perfect contact at all time the wheel positioning is very critical. Both the bottom wheels are place below the base of the robot to facilitate more space for other components such as power source, camera, controllers, sensors etc. The remaining three wheels are positioned perpendicular to each other on the actuator arm. The length of this arm can be varied using the linear actuator mechanism. In the present case this linear actuator mechanism is a simple rack-pinion mechanism. All the three arms are synchronised such that under operation the displacement of arms is equal in all directions. Four proximity sensors are used to calculate the distance between the surface of pipe and surface of the tyre. Three sensors are linked to one at each actuating arm in their respective direction. One sensor is linked to calculate the distance from surface of front tyre to the surface of the inspection panel. The three sensors on actuator arm are categorised into a single sensor unit (say sensor unit 1), while the other sensor (say sensor unit 2) is categorised separately. The categorised bill of the materials used is as follows Working of the robot Initially when the robot is at rest, all the three linear actuating arms are in contracted position. When the system of the robot is started, the sensor unit 1 present on the linear actuator arms calculates the distance between wheel and surface of pipe and sends the feedback to the on-board CPU. The CPU then sends a signal to increment the step motor to one step. This whole process of increment of steps continues until the wheel touches the surface of pipe and thus exerts a small normal force to grip onto that surface. Once this process is completed, drive motors of the robot are actuated. These motors are controlled by on-board CPU with the help of feedback from the sensor unit 2. All the five motors through a gear box connected to the wheels are powered with equal force, hence powering robot equally in all directions and sensor unit 1 ensures theres maximum grip available at the end of the actuating arms. The power to the motor is stopped once the sensor unit 2 senses the distance between the front wheels and the inspection panel is 0.2m, thus activating the camera to carry the inspection process. This whole process can be controlled using a manual operation panel or fully autonomous programmed GUI on-board. Simulation of vehicle dynamics The vehicle dynamics of the robot are established using specific equations for motion. This analysis is used to determine the performance capacity and capability of the robot. It also helps to calculate the velocity, force dynamics at any instance of time. Before using the equations a few assumptions are considered. The drag forces exerted on the body and wire are neglected. The drive force from the wheels is considered to be a constant ideal force, where wheel slip and wheel tyre deflection are neglected. The gravitational constant and the friction coefficient considered to remain constant throughout the process. The simulation emphasises more on the vehicle motion along the entire length of pipe including the inclined part of pipe. The terminology used for the following calculaitons are as follows Parameter Description Value mb Mass of robot 1.8 kg r Radius of the wheel 0.03m mw| mass of wire per unit length 0.2 kg/m Ub Coefficient of friction of body 0.5 Uw Coeffient of friction of wire 0.2 G Gravitational constant 9.81 m/s2 Ts Stall torque of motor 0.9 kg-m Wn No load speed of motor 38 rpm O Angle of inclination of pipe 40o Straight path A constant force is produced through five drive motors and is calculated as follows, where Fm is the force exerted by the motor, But the torque generated by the motor changes with velocity of the body. Torque at any time is given as Where w is rotational speed at that instant of time. W can be written in terms of velocity v of the body Since there are five motors present to power the robot, the net force exeterd by motors at any time is The frictional force (Ffb) acting on the body due to its own weight Frictional force (Ffw) due to mass of wire Where mw is mass of wire carried at that time and is calculated by using length l of distance travelled by the robot The resultant force(F) resulting in forward motion of the robot Acceleration(a) of the body is given by Velocity vf of the body is given by Displacement lf of the body is given by à ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€ š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦Ãƒ ¢Ã¢â€š ¬Ã‚ ¦. Inclined path Consider the instance at which the robot just reaches the inclined path of the pipe. The force exerted by the motor remains constant as in eq(). When the robot is in inclined position weight gradient of body(Fgb) and weight gradient of wire (Fgw)opposes the motion of body. These are given as The frictional forces acting opposite to motion also changes as follows Where l is the total displacement along the pipe The net force (Fi) acting on the body along the pipe is Acceleration of the body along the pipe Velocity (vi) of the robot at any instance is given by Where vf is the velocity of the robot at the start of the inclination. Abstract-These instructions are a guide to the assignments to be submitted for Mech5090 Mechatronics and Robotics Applications [this section should contain a brief description of the task and outcomes] The assignment must not exceed 6 sides of A4!!!! Index Terms-About four key words or phrases in alphabetical order, separated by commas. INTRODUCTION THIS document is a template for Microsoft Word versions 6.0 or later. Do not change the font sizes or line spacing to squeeze more text into a limited number of pages. Use italics for emphasis; do not underline. To insert images in Word, position the cursor at the insertion point and either use Insert | Picture | From File or copy the image to the Windows clipboard and then Edit | Paste Special | Picture (with float over text unchecked). This section should contain a description of the problem and a critical discussion of the references used for the work. System designà ¢Ã¢â€š ¬Ã‚ ¦ Mechanical considerationsà ¢Ã¢â€š ¬Ã‚ ¦. eg This section should contain the description of the system you propose including any specific hardware you are proposing to use. You can be flexible how you use headings and divide the work up. References Number citations consecutively in square brackets [1]. The sentence punctuation follows the brackets [2]. Multiple references [2], [3] are each numbered with separate brackets [1]-[3]. When citing a section in a book, please give the relevant page numbers [2]. In sentences, refer simply to the reference number, as in [3]. Do not use Ref. [3] or reference [3] except at the beginning of a sentence: Figures The assignment should contain technical/non-technical illustrations of important aspects of the work. Graphs The assignment may contain graphs produced by a software package such as Matlab. They should have the correct axis/units. They must have a figure caption and be referenced in the text. Tables of information are also fine with the rules above adhered to. Equations Number equations consecutively with equation numbers in parentheses flush with the right margin, as in (1). First use the equation editor to create the equation. Then select the Equation markup style. Press the tab key and write the equation number in parentheses. To make your equations more compact, you may use the solidus ( / ), the exp function, or appropriate exponents. Use parentheses to avoid ambiguities in denominators. Punctuate equations when they are part of a sentence, as in (1) Conclusion A conclusion section is required. Although a conclusion may review the main points of the paper, do not replicate the abstract as the conclusion. A conclusion might elaborate on the importance of the work or suggest applications and extensions.

Bell Jar summary :: essays papers

Bell Jar summary Many have paralleled Sylvia Plath’s novel, The Bell Jar, to her very own life. Plath is known for her tormented life of constant depression and disappointments, causing her to end her life early at the young age of 30. The time frame in which the book is in matches the times when she is enlisted in many mental institutes and ultimately her suicide. The story of Esther Greenwood also tells the feelings and emotions of Sylvia Plath. Other characters in the novel are said to be in relation to characters in the author’s life. The novel begins where Esther is just about halfway through her job as Mademoiselle, a fashion magazine. She and many other girls received this opportunity because of their exceptional writing abilities. Even though this she had waited for this chance for a year, she is actually disappointed because she had expected more from the other prizewinners. â€Å"These girls looked awfully bored to me. I saw them on the roof yawning and painting their nails and trying to keep their Bermuda tans, and they seemed bored as hell... Girls like that make me sick.† (Pg. 4) A couple other unfortunate events also led her to be depressed at her stay in the hotel. At a dinner gathering, Esther ate a lot of crabmeat that happened to be poisoned. She passes out and awakes in her room. Her recovery is slow and agonizing. Another social event causes yet again another mishap. Doreen, Esther best friend there, sets Esther up with a friend of Doreen’s boyfriend to go to a party. There, the bli nd date attempts to sexually assault, but Esther resists and walks away with her dignity. After returning to the hotel, Esther takes no care of the assault and just carries on. Later, she finds out that her on and off boyfriend, Buddy Willard, is actually not a virgin. â€Å"At first I thought he must have slept with the waitress only that once, but when I asked how many times, just to make sure, he said he couldn’t remember but a couple of times a week for the rest for the summer.† Knowing this, she thought it to be okay if she were to have an affair also. On a date with Constantin, he invites her to his room, but to her dismay, nothing happens.

Meubles Canadal: Looking Towards the Future Essay

Introduction Meubles Canadel is Canada’s leading manufacturing firm in producing high quality furniture for dining purposes and was established in 1982 by three brothers in Louisville, a small town in the province of Quebec in Canada. It is a privately own company and established itself from a small to a large international operating company with still increasing sales around $125 million in 2000. Between 1987 and 1991 Canadel grew rapidly. This was due to the fact that the firm focused on demographic changes. The families’ size decreased in this time and shifted the demand from the â€Å"lunch-corner† and formal dining room segment to dining room furniture to everyday use. Canadel took advantage of this change and started to produce high quality dining furniture. With continued increasing sales, the firm expanded to the U.S market and additionally serves now the eastern part of the U.S with its products. Looking at Canadel in 2000, the firm owns 50% of the dining room market although prices are generally higher than competitor’s prices. At this point in time, the company’s sales were mostly coming from the U.S (75%), 20% from the Canadian market and five percent from Europe and Japan. Further, Canadel’s staff represented 1,550 people of which 800 are directly employed. In the following a case analysis of Canadel will be conducted. The first part represents the external environmental analysis whereas the second part focuses on the internal factors influencing the firm. Ultimately a conclusion will be drawn. External environmental analysis An external environmental analysis contains a macroeconomic and a microeconomic view on firm’s influencing factors. On the macroeconomic level one could ask a general question for example which environmental factors do affect the firm and its strategic management. It is necessary for Canadel to maintain a coherent strategy that fit in its environment in order to reinforce its distinctive competencies and establish sustainability in creating value to its stakeholders. In order to answer this question a PESTEL analysis will be conducted, where the macroeconomic view is studied. PESTEL stands for political, economic, sociocultural, technical, environmental and legal factors, which affect the firm and its strategy. Regarding political factors, the Canadian furniture industry was massively influenced after the introduction of the Free Trade Agreement (FTA) between the United States and Canada in 1989. Trades between both countries have become easier due to the elimination of tariff s and in addition competition increased. However, Canadel was not operating internationally in this time therefore, only the increase in competition could have influenced the firm. The next factor, which influences Canadel, is the economic impact. Exchange rate fluctuations between the U.S. and the Canadian dollar can affect the export to the United States, which can cause both losses and profits for Canadel. At the moment the firm has an advantage because the Canadian dollar has a strong position compared to the U.S. dollar. However, this used to be different and therefore it is important for the three Deveault brothers to take this factor into consideration in order to avoid losses. Another point is the huge unemployment rate that is mentioned. The Deveault brothers feel that they have an obligation to stay in Quebec in order to support their hometown and province, which would not be ensured if they would look for other suppliers in different regions. This decision influences the firm’s management strategy. On the one hand it could mean that Canadel does not take the opportunity to look for other suppliers in different regions who might be cheaper and therefore would enable the firm to benefit in costs savings. On the other hand it improves the relationship to its suppliers and increases loyalty on both sides, which can be more valuable than any cost saving strategy. The next external factor is the sociocultural development over time. As already mention, Canadel is a local company carrying about its employees and suppliers. This clearly influences its strategic operational decision as above discussed. Moreover, the company took advantage of the demographic changes in lifestyle and family size. It began to produce smaller exclusive tables and profited from the decrease in family size. Further, Canadel has a very unique attitude towards work, hiring policy and leisure. It is mentioned that the Deveaults try to maintain a small power distance between their employees and the management level. The company does not have a hierarchal structure and stands for an open-door policy where employees any time have the possibility to see the mangers and talk to them. Meetings held within the management level or with suppliers are classified as very informal without a secretary taking notes. These characteristics affect Canadel’s business decision like staying in the region of Quebec to conduct its business in favour of the local population. Another economic factor is the technological change in the last couple of years. It is obvious that machinery improved and facilitated the manufacturing process of wood. However, one has to remember that the company emphasises the production of unique hand made dining tables. This could lead to the conclusion that the technological improvement did simplify the manufacturing process however, not in the major way. This is solely due to the fact that the production of exclusive dining table is very labour intensive. The last two macro-economic influences environmental and legal impacts are not sufficiently addressed in the case and will be left out in this analysis. On the microeconomic level the model of Porter’s five forces will be used to detect competitive forces that affect the firm’s business decisions. First, the entry barriers are described as very low, which increases the risk of potential new competitors for Canadel. This might give reason to establish the firm as a market leader in the industry in order to threaten potential new competitors. This could be important due to some potential competition from the Asian markets. However, this does not necessarily mean loosing all of the firm’s customers if competition increases because Canadel produces a very specialised product, which cannot be easily copied. Nevertheless, it can complicate Canadel’s business strategy and force them to decrease costs in order to possibly decrease its very high prices for dining furniture. Another fact is that Canadel has a very good relationship to its suppliers and staff, which enables the firm to profit from this loyalty if competition increases. Summarising, it can be said that overall competition is low in this industry. The threat of substitutes can be described as relatively low because people who can afford to pay around $7,000 for a dining table would probably not purchase furniture at firms like IKEA. Moreover, Canadel’s products seem to be very unique and therefore hard to find anywhere else. Analysing the bargaining power of suppliers it can be said that the firm operates with many smaller suppliers in the region of Quebec. Thus, a low bargaining power is identified. Compared to that the bargaining power of customers is characterised as significantly stronger because Canadel produces very unique products, which addresses a specified branch of customers. This could lead to problems if sales decreases and might cause the company into trouble and force them to adjust for this changes. Internal environmental analysis The next part describes the internal factors which influences the firm’s operating strategy. This can be established by a SWOT analysis to detect the firm’s strengths, weaknesses, opportunities and threats. One of the most important strengths Canadel can present is the large subcontractor network, which it can rely on. Long-time relationships are important for the firm, as it knows most of its stakeholders from the very beginning. Therefore, controversies and conflicts are probably less frequent and decrease the fear of shortages in resources used for the production process. Further, Canadel has a well developed retail network, which shortens its delivery time compared to its competition. A next strength is the uniqueness of its products and its high quality, which is very much appreciated by the consumers. The high price of Canadel’s products can be identified as a weakness and might decrease its potential number of customers. Maybe it might be valuable to think about an additional production line that is cheaper and hence affordable to more people. A further weakness is the just-in-time (JIT) inventory system that could easily cause shortages although the firm accounted some time lack due to human errors. That JIT inventory system can be of course also identified as a firm’s strength. Canadel’s opportunities are already recognised by the expansion in the U.S. market, which could also be extended to the western part of the U.S. The already mentioned cheaper product line could be an opportunity to attract more consumers and to increase sales or to broaden the firm’s product segment. Major threats of the company are the Asian manufactures, which are likely to produce cheaper products and therefore might capture some of Canadel’s sales. Moreover, it can be said that Canadel has a major competitive advantage in producing high quality and unique dining furniture. It has the capabilities and resources, which is supported by the geographical location. A strong value chain can be identified with a good stakeholder network and a good infrastructure. These factors facilitate the firm’s operating position by focusing on the resources, capabilities and resources of Canadel. Conclusion In conclusion it can be said that Canadel managed to establish itself with a strong position in the fast growing dining room market. It has many opportunities to improve this position and expand its business by increasing its product line and thus attract more consumers. Further, it needs to pay attention to possible new competitors entering the market. Therefore, the philosophy to â€Å"grow when its time to grow† should not be taken too seriously because this might cause trouble to Canadel. It has to adjust to demographic and environmental changes. However, it should maintain its unique business culture and operation strategy. References Johnson G., Whittington R., Scholes K. (2008). Exploring Corporate Strategy (9th edition). Harlow UK: Pearson Education. Mark K., Hebert L., Crossan M,. (2001). Meubles Canadel: Looking towards the future. Richard Ivey School of Business, University of Western Ontario.

robinsin crusoe essays

robinsin crusoe essays Robinson Crusoe is an imaginary story about a merchant-adventure marooned on a desert island off the northern coast of South America. Daniel Defoe wrote this novel in 1719.He based the story partly on the experiences of a Scottish sailor, Alexander Selkirk, but defoe's realistic account of Crusoe's like is much more interesting, and has become one of the most popular books in English. The book explains how Crusoe cleverly manages to make himself at home while he lives on the island. From my point of view the unique part that connects at this point in the story is that after living alone for 26 years, Crusoe rescues a man from cannibals. He calls the man Friday because he met him on that day. Friday becomes Crusoe's trusted friend and servant. The term, "man Friday" has come to mean any trusted servant. Finally after 28 years, Crusoe and Friday board a passing ship and are taken to England. "Robinson Crusoe" is a lively, exciting book that sweep the reader away in to amazing world. Although the English of the book is "old fashion", I recommend it from the bottom of my heart! A Close: (fill out the blanks with one or two words) Robinson Crusoe has always been one of the popular novels in the English language. I believe that the to the fact above is that Robinson Crusoe is one of the realistic novels that were ever published. During the novel plot develops, describes events and scenes in great detail and them seem very alive. The fate of has held a special fascination for me. As I watch Crusoe struggle to survive alone on a Island , I pot myself in his place and wonder how long I would have lived in such harsh . Could I, like Crusoe, have begun to build anew life for myself? Or would hunger and the terrible loneliness have destroyed a ...

Gabriel Oak Essays

Gabriel Oak Essays Gabriel Oak Paper Gabriel Oak Paper Gabriel Oaks character has developed a lot in Far from the Madding Crowd. He started off as clumsy and foolish and he ended up as heroic. A hero is a man admired for achievements and noble qualities; In this case this word does not refer to someone with superhuman powers! The first description of Gabriel Oak: on working days, he was a man of sound judgement, easy motions, proper dress and general good character. Hardys description implies that there is nothing special about Farmer Oak; that he is just an average man. Hardy also states, that on a Sunday, a non-working day; Oak is a kind of pepper and salt mixture. This means that he is normal; he is a man with balanced morals. Another thing that Hardy uses to bring across Oaks personality is the way he dresses. This gives people more idea about Oaks character and personality. His clothes were very practical but they made him look clumsy and foolish. Hardy also states that Gabriel was a source of some amusement; his watch was very difficult to get out, apart from being amusing, this also demonstrates that Oak doesnt need to use modern conventions to tell the time. He can use the position of the sun and stars to tell the time. This is an example of how close he is to nature. : This is also hinted in his name: Gabriel oak, the word oak is used to describe him as natural and sturdy like the oak tree. In the 1st chapter, Bathsheba is in a carriage laden with goods, she is stopped at a toll gate and she refuses to pay the toll. When Farmer Oak sees this he steps in and pays the man at the gate the money needed to let Bathsheba pass. This shows that Oak is a generous and bold man. Generosity is one of Oaks many noble qualities. In chapter 5, Hardy demonstrates one of Gabriels first changes in character: one of Farmer Oaks dogs rounded up and chased all of his flock over the cliff. This lost him a lot of money as the sheep were not insured and ruined his livelihood. His first thought was of pity, he felt pity for the sheep, after this Gabriel muttered: Thank God I am not married: what would she have done in the poverty now coming upon me! This proves Oak to be a very humble and kind man, he did not think of himself or the debts he now had. This demonstrates another noble quality that Farmer Oak has: selflessness. It also shows Oaks true feelings about Bathsheba. In chapter 6, Hardy also demonstrates Oaks heroism: there was a fire at the farm in weatherbury, a rick of straw had caught fire in a barn. There was a crowd of spectators all panicking, none of them new what to do. Gabriel immediately and calmly took charge of the panicking crowd. He called for a ladder and began putting out the fire himself with no concern of his own personal safety. This was a very heroic act by Gabriel. He was described as bold by one of the bystanders. In chapter 21, there is another disaster at Bathshebas farm, one of her flocks of sheep managed to get into a clover field and they are all going to die. Bathsheba sends for Farmer Oak; he is the one who knows how to cure them, as Oak has just been sacked from the farm, he is reluctant to come back and help. Although, Gabriel swallows his pride and goes to the farm and began to cure the sheep very calmly and precisely: Gabriel began to use it with a dexterity that would have graced a hospital surgeon. This is a very heroic act, he swallows his own pride and helps someone else, he didnt even think about receiving a reward, he did it out of his own kindness and his own concern for the animals. In chapter 36, Gabriel realises that there is lots of Bathshebas produce exposed to rain. He goes back inside to fetch help but everybody has passed out because they were drunk. Gabriel, rather than leaving it and hoping it would not rain, begins work atop the rick with no concern for his own safety. This is a very helpful and heroic thing to do. In chapter 37, Gabriel Oak is working on top of one of the ricks of straw in a powerful lightning storm. Bathsheba comes up to help Oak; they then begin to engage in an intimate conversation in which Bathsheba turns to Gabriel for guidance. Once again, Farmer Oak puts his own feelings aside and guides Bathsheba. Thomas Hardy made Gabriel Oak the hero in this novel, at the end of the novel, Gabriels noble qualities finally paid off and he managed to marry Bathsheba Everdene; he was always the one standing by her side, supporting and helping her in whatever she did. Hardy implied this by his name- he was a rooted form of support. This shows Farmer Oak as a true hero, putting his feelings aside to help others.

Outline the required contents of the Airplane Flight manual and the Essay

Outline the required contents of the Airplane Flight manual and the Aircraft Maintenence Manual - Essay Example Currently, formats and contents of airplane and rotorcraft flight manuals are stipulated by the General Aviation Manufacturers Association’s (GAMA). An airplane manual has numerous sections that contain adverse information concerning the model of the aircraft at hand. This section provides the fundamental descriptive information about the airplane and power plant whereby most manuals include a three-view drawing of the airplane that provides dimensions of various components. Some of the components included in this section are airplane’s wingspan, its maximum height, overall length, and wheelbase length (American Flyers, 2014). The last part of the General section encompasses abbreviations, definitions, explanations of symbology, as well as some of the vocabulary used in the manual. This section comprises of the delimitations required by the regulation and that are crucial for the safe operation of the aircraft, systems, equipment as well as power plants. It comprises of operating limitations, instrument markings, color coding, as well as basic placards (United States, 2007). Airspeed, weight and loading distribution, power plant, and flight are some of the limitations areas that are included in this section. The Normal Procedures section starts by listing the normal airspeed for normal operations, several checklists that may include preflight inspection, before starting procedures, starting engine, before taxiing, taxiing, before takeoff, takeoff, climb, cruise, descent, before landing, balked landing, after landing, and post-flight procedures (United States, 2007). Amplified Procedures area may be provided so as to give more details about the diverse procedures. This section contains all the information required by the aircraft certification regulations, and any additional performance information the manufacturer feels may enhance a pilot’s ability to

How Technology is Changing the Face of Business Today 2 Assignment

How Technology is Changing the Face of Business Today 2 - Assignment Example Technology has changed the face of business, through its ability to advance communication and reduce barriers to business opportunities. Technology has provided a platform for the transmission of crucial information for consumers and business people (Simon, 2011). The storage of information on computer files and virtual spaces has increased the accessibility of information to parties involved in business transactions. Additionally, the use of technological approaches such as e-mails allows businesses to communicate with remotely located people, offices and customers. Netflix is one of the companies that rely on information systems to conduct its business. The most crucial business process that relies on information systems is internet video streaming. The business provides internet video streaming to internet connected devices. These devices have access to online content provided by the firm (Jin, 2011). In order to offer this service effectively, Netflix recognized the need to use information systems. Customers do not have to purchase video discs from rental services. They only subscribe to Netflix, which gives them the content through an online platform. Technological approaches and innovations have led to changes in how businesses are conducted. Technology provides a platform for increased accessibility of information and increased ease of transacting a business. Companies such as Netflix have harnessed the abilities of technology to offer their customers exemplary services and